Pettit Trinidad Slime-Resistant Black Antifouling Paint - Gallon

Description

Other
Pettit Trinidad Slime-Resistant Black Antifouling Paint - Gallon
Product SKU:
PET-1877G
Item Condition:
New
MSRP
0.49
Sale Price
8.98
Product Description:
Trinidad SR is the standard by which all bottom paints are measured. It remains the longest lasting, strongest antifouling paint available. Utilizing the dual biocide combination of a high copper load and slime resistant Irgarol, Trinidad SR provides unprecedented resistance to all fouling. Its hard protective coating has excellent adhesion, and withstands the toughest abuse. Left in the water, it will provide years of dependable service. So effective it earned Practical Sailor’s "Gear of the Year" honors twice.
Dual Biocide with High Copper Load for Unprecedented Protection
Can be Burnished for a Smooth Racing Finish
Hard Durable Finish for Long Lasting Performance
The Bottom Paint Standard
Trinidad is the standard by which all bottom paints are measured. This enhanced formula has over 20% more copper added to ensure it remains the longest lasting, strongest antifouling paint available. Trinidad provides a hard protective coating with excellent adhesion and a durable finish that withstands even the toughest fouling conditions. Pettit’s exclusive Slime Release technology combines high biocide load with PTFE for unprecedented resistance to barnacles, algae, slime, and other marine and fresh-water fouling organisms.
Colors Available:
Blue
Green
Black
**Do NOT use this product on aluminum hulls and outdrives**
***AVAILABLE ONLY FOR GROUND SHIPPING, WITHIN THE CONTINENTAL 48 STATES***
How To Apply
APPLICATION DATA METHOD
: Brush, roller, airless or conventional spray.
NUMBER OF COATS:
2
DRY FILM THICKNESS PER COAT:
2 mils (3.5 wet mils)
COVERAGE:
400 sq. ft/gal.
APPLICATION TEMP:
40°F Min. / 90°F Max.
THINNER:
120 Brushing, 121 Spraying
DRY TIMES:
Temp
To Recoat
To Launch
90°F
3 HR
8 HR
70°F
6 HR
16 HR
50°F
12 HR
24 HR
PREVIOUSLY PAINTED SURFACES:
If the previous coating is in good condition, thoroughly sand with 80 grit paper then solvent clean with 120 Brushing Thinner to remove residue. Apply two finish coats of Trinidad SR. If the previous coating is soft or in poor condition, remove to the bare surface by sanding or using Pettit 9051 Bio Blast Paint Remover. Proceed with appropriate bare system as described below. Old tin copolymers should be removed or sealed with Pettit 6627 Tie Coat Primer before applying Trinidad SR Antifouling.
BARE FIBERGLASS:
All bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 120 Brushing Thinner to remove sanding residue. Then apply two or three coats of Trinidad SR, following application instructions. Careful observation of the above instructions will help ensure long term adhesion of this and subsequent years’ antifouling paint. To eliminate the sanding operation, two methods are available: 1. Prep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit 95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip-Sand Primer or 6999 Sandless Primer. Use a 3/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Trinidad SR. 2. Clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a course Scotch-Brite pad in a swirling motion. Then apply one coat of Pettit 4700/4701 High Build Epoxy Primer. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Trinidad SR. Barrier Coat: Fiberglass bottoms potentially can form osmotic blisters within the gelcoat and into the laminate. To render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method) then apply three coats of Pettit Protect 4700/4701 High Build Epoxy Primer or three coats of Pettit Protect 4100/4101 White High Build Epoxy Primer per label directions. Apply two or three finish coats of Trinidad SR.
BARRIER COAT:
Fiberglass bottoms potentially can form osmotic blisters within the gelcoat and into the laminate. To render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method) then apply three coats of Pettit Protect 4700/4701 High Build Epoxy Primer or three coats of Pettit Protect 4100/4101 White High Build Epoxy Primer per label directions. Apply two or three finish coats of Trinidad SR.
BLISTERED FIBERGLASS:
See Pettit Technical Bulletin TB-1000 Gelcoat Blister Repair and Prevention Specification for detailed instructions.
BARE WOOD:
Sand entire surface with 80 grit paper; wash clean with 120 Brushing Thinner. Apply a coat of Trinidad SR thinned 25% with 120 Brushing Thinner, allow an overnight dry, lightly sand and wipe clean. Apply two finish coats of Trinidad SR.
BARE STEEL:
Sandblast or disc sand to a clean, bright finish remove residue. Then either immediately apply two coats of 6980 Rustlok Steel Primer, allowing each to dry only 1-2 hours prior to over coating - OR - immediately apply one thin coat of 6455 Metal Primer and allow to dry two hours; follow with two coats of 6627 Tie Coat Primer, allowing each to dry two hours minimum. Apply two finish coats of Trinidad SR.
KEELS - LEAD:
Abrade surface to bright metal; clean off residue. Apply one thin coat of 6455/044 Metal Primer; allow to dry two hours. Apply one coat of Pettit 6627 Tie Coat Primer then, if fairing is required, apply 7050 EZ-Fair Epoxy Fairing Compound. Follow with an additional coat of 6627 Tie Coat Primer per label directions. Apply two finish coats of Trinidad SR.
KEELS - STEEL OR CAST IRON:
Abrade surface to bright metal; clean off residue. Apply one coat of 6980 Rustlok Steel Primer, allowing to dry only 1 - 2 hours prior to over coating. Then, if fairing is required, apply 7050 EZ-Fair Epoxy Fairing Compound followed by one coat of Pettit 6627 Tie Coat Primer, finish with two finish coats of Trinidad SR.
DO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.
About Us
Wholesale Marine is an on line boating store founded to provide customers an easy way find top-quality products at the lowest prices. With associates who possess decades of combined boating experience, Wholesale Marine can truly provide expert customer service.
Shipping Method
Wholesale Marine currently ships all merchandise UPS or truck freight. All orders with in-stock items placed by 2:00 PM EST Monday - Friday are shipped that same day. Orders placed after 2:00 PM on Friday and orders place on Saturday and Sunday will ship on the following Monday. Orders that qualifying for free shipping may be shipped  any method and carrier chosen by Wholesale Marine.  Free shipping offers are only valid within the continental U.S.
There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives.
*Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control.
Returns
Wholesale Marine will gladly refund almost any merchandise within 30 days from original purchase date. To return just send merchandise prepaid, in its original unused condition. Please include a copy of original Wholesale Marine invoice. We will then refund the merchandise amount by the original payment method. Shipping costs are not refundable. No returns for special order items, electronics, cut lengths of material or hazardous materials, such as but not limited to paint, oil, resins and adhesives.
Please ship all Returns to:
Wholesale Marine
147 Circle Freeway Drive
Cincinnati, OH 45246
Connect with Us
Find us on:
Powered by SixBit's eCommerce Solution